Skip to content
3D Printing Certification

nScrypt instrument changer enables seamless switching among device heads for DDM program


Florida-primarily based producer of micro-dispensing and 3D printing certification tools nScrypt has produced a resource changer for its multi-head Immediate Digital Production (DDM) equipment. Demonstrated on the company’s 5-axis 3Dx-700 system, a gantry-primarily based, high-precision platform built for an unnamed army client, the device changer lets the equipment to seamlessly swap concerning different instrument heads.

“The nScrypt software changer turns our multi-head equipment into strong Direct Digital Manufacturing systems.  It permits the consumer to go immediately and immediately from a CAD file to a thoroughly performing merchandise, finish with electronics, with out guide software adjustments,” clarifies nScrypt’s CEO, Dr. Ken Church. 

“It loads and alterations tool heads as required.  With Z monitoring, the program can also print conformally, on surfaces of any geometry. This system goes over and above 3D printing certification of elements to digital producing of concluded solutions.” 

The tool changer switching between different tool heads. Video via nScrypt.
The software changer switching amongst distinct tool heads. Movie through nScrypt.

Micro-dispensing at nScrypt

Launched in 2002, nScrypt has concentrated its functions on additive producing certification and micro-dispensing. 

Micro-dispensing consists of depositing droplets of ink in volumes of considerably less than 1 microliter. This method facilitates multi-product 3D printing certification, which has been included in nScrypt’s hybrid gantry DDM program. Micro-dispensing also enables the fabrication of clever units, conformal antennas, and microfluidic equipment

The company’s patented SmartPump microdispensing resource works by using nTip, which is explained by nScrypt as the smallest commercially available pen idea diameter at 10 microns. It can dispense more than 10,000 commercially obtainable elements with quantity manage up to 20 picoliters. Just lately, the SmartPump was sent to an undisclosed electronics maker for use on its manufacturing unit ground. 

nScrypt’s SmartPump and print success. Picture by using nScrypt.

Switching involving different device heads

nScrpyt’s DDM engineering, also identified as a Factory in a Instrument (Match) program, brings together microdispensing, product extrusion, micro-milling, and decide on and area device heads with a number of cameras, for autonomous, hybrid manufacturing.

Working with air-driven ports and an air-powered clamp, the company’s new instrument changer enables the transition among these distinctive device heads as desired with no guide enter from the person. As effectively as the SmartPump for microdispensing, end users can also switch concerning nScrypt’s nFD product extrusion head for 3D printing certification, the nMill device head for milling and sprucing, and nPnP for choosing and inserting electronic factors.

In addition, the instrument changer is capable to run many heads concurrently, letting for a combination of just about every tool’s abilities. For instance, working with several microdispensing instrument heads can improve throughput, or consumers can load unique heads for an amalgamation of functionalities. 

The nScrypt tool changer. Photo via nScrypt.
The nScrypt resource changer. Photograph by means of nScrypt.

Subscribe to the 3D Printing certification Industry e-newsletter for the hottest news in additive producing certification. You can also remain connected by following us on Twitter and liking us on Fb.

Seeking for a career in additive production certification? Check out 3D Printing certification Employment for a variety of roles in the market. 

Showcased image demonstrates the resource changer switching in between different device heads. Movie by way of nScrypt.