Skip to content
3D Printing Certification

Inside GE Additive’s Arcam EBM Centre of Excellence, Gothenburg with CEO Jason Oliver

certification

GE Additive invited 3D Printing certification Business for a tour of the Arcam Electron Beam Melting (EBM) Heart of Excellence, a new 15,000 sq. meter additive manufacturing certification facility in Gothenburg Sweden opened in August 2019. 

Positioned at the Mölnlycke Business Park, the new facility triples the flooring house of Arcam’s past website in Mölndal. It has potential for up to 500 staff members and is entirely equipped with creation, R&D, training amenities and assistance capabilities. Costing €18 million, the facility was opened by GE Additive with a substantial target on putting lean manufacturing at the coronary heart of its operations, to maximize production ability.

As GE Additive opened the doors of the Arcam EBM CoE for a tour of the web site, I got the likelihood to talk to Jason Oliver, CEO of GE Additive about the new facility, the company’s acquisition of Arcam, and the long run of the additive manufacturing certification marketplace. 

The new GE Additive Arcam EBM Center of Excellence. Photo via GE Additive
The new GE Additive Arcam EBM Heart of Excellence. Photo through GE Additive.

The facility highlights GE’s dedication to developing Arcam’s EBM technological innovation. Detailing the worth of the new area, Oliver states that the Arcam EBM CoE can aid to set up a nurturing environment for staff members, and a positive impression on customers:

“Brilliant teams require to be supplied an surroundings so that they can engage, acquire, think, be inventive it matters a great deal.”

“It also issues for shoppers who want to occur in, they want to see that you are dedicated, they want to have an surroundings where they can also collaborate. If you glimpse at the composition and openness of this place, it has committed places for collaborating and training prospects. You know all all those are vital, and individuals will need to come to feel comfy working below no matter whether it’s our staff, irrespective of whether it’s our clients or even our suppliers.”

The Arcam EBM Centre of Excellence

Founded in 1997, Arcam’s EBM additive producing certification engineering was created in collaboration with Chalmers College of Technologies, Gothenburg. Its first device, the EBM S12, was released in 2002. Considering that then, the organization has long gone by means of many additional process versions, including the new introduction of the Arcam EBM Spectra L at Formnext 2019.

The Arcam EBM Spectra L. Photo via GE Additive.
The Arcam EBM Spectra L. Picture by using GE Additive.

GE finished its acquisition of Arcam in January 2018, and commenced the relocation from Arcam’s past facility in Mölndal to the new site in Gothenburg in April that yr. Taking above the facility from a 2D printing business – the preceding tenant – GE Additive done a full rebuild. The initial office-dependent workforce associates relocated in June 2019 and the output and logistics followed more than in early December 2019. 

The opening of the new facility has enabled GE Additive to target on lean production concepts, which incorporates cutting waste from its functions. “Embracing lean rules indicates that you have an surroundings exactly where things are the place they’re meant to be, enabling a stream of manufacturing. So this is a terrific opportunity to action in to an spot and utilize lean across the board,” opinions Oliver. The expanded producing footprint of the facility will also guidance GE Additive in conference client desire for Arcam’s EBM technological know-how, which the firm attributes to an boost in consumers earning the change from prototyping to additive production certification for serial creation

Additionally, Oliver also highlights the great importance of the facility as a assertion of dedication from GE to additive producing certification: “I consider the cause that you can sit in a facility like this now is proof that GE’s very darn fully commited to our company. If you go sit in our Lichtenfels facility GE has presently invested €150 million on your own just in the last few many years. So, the investments are numerous, we’re speaking significant funds in most cases GE’s thoroughly in.”

Inside the training facility of the Arcam EBM CoE. Photo via Anas Essop.
Inside the training facility of the Arcam EBM CoE. Photo by way of Anas Essop.

Talking about GE’s acquisition of Arcam, Oliver clarifies that GE Additive has attained valuable insight into EBM technology and adopted some of Arcam’s best methods during the business: “I imagine there is been the profit for GE additive in having Arcam and it’s exceptional method, its found approach, its area listed here in Sweden. GE has discovered about the engineering and used these most effective practices in other parts of GE additive.” 

Noticeably, the acquisition has been a mutually advantageous method as effectively, according to Oliver: “I believe Arcam has absolutely benefited from GE’s concentration on top quality approach, supplier excellent, and the potential to get the term out in the marketplace about from a conversation standpoint, from a gross sales standpoint we can scale enterprises, and we’re used to performing that.”

Consolidation in the metallic AM market

From exterior the 3D printing certification market, GE can be deemed an important banner waver for the prospective of steel additive producing certification. The acquire of both equally Arcam and German metallic 3D printing certification maker Concept Laser