Skip to content
3D Printing Certification

Fused Deposition Modeling | 3D Printing Website


3D Printing certification Technologies: Fused Deposition Modeling

Contrary to popular perception, there is not a a person-dimension-fits-all method to 3D printing certification. Although we give 17 diverse supplies and more than 90 possible coloration and finish combos, it typically normally takes us many different technologies to get the position finished.  In standard, 3D printing certification systems can be split up into 2 teams: direct and indirect 3D printing certification. The key big difference lies in the truth that the layout is made from 3D printing certification (direct) or 3D printing certification was made use of in the procedure of generating your model (indirect). Let’s move on with the third component of this collection with fused deposition modeling, in all probability the most adopted 3D printing certification technological know-how all around and an instance of a immediate 3D printing certification procedure. 

How It Operates: Fused Deposition Modeling (FDM)

The Basic Principle

The Simple Basic principle

Fused Deposition Modeling is used to build your models in Ab muscles. The principle is easy. You can examine it with a incredibly hot glue gun into which you set sticks of glue. The glue is heated up right until it melts and is then pushed by a fine nozzle in the entrance of the glue gun.

In a experienced FDM printer, a very long plastic wire is made use of in place of glue. It is fed by a spool to the nozzle where by the material is liquefied and ‘drawn’ on the platform exactly where it immediately hardens again. The nozzle moves to drop the substance at the appropriate locale, drawing your design line by line. When a layer is drawn, the system lowers by a single layer thickness so the printer can start with the future layer.

When your design incorporates overhanging sections, the printer desires to make supporting material. Since the content of the product cannot be deposited in the air, the support product helps prevent it from falling down. This assist product is fed through one more nozzle. Afterward, when the product is place into a bathtub with a special cleaning soap, the aid substance dissolves.

FDM Material

Nokia Lumia 820 case by Dries Vandecruys

Nokia Lumia 820 circumstance by Dries Vandecruys


  • Suitable for full functional designs (it has 80% of the strength of injected molded Ab muscles)
  • UV resistant
  • Come closest to the substance of actual manufacturing products
  • Layer thickness involving .13 – .25 mm

FDM Printing Sizes

The Printing Size of ABS

The Printing Size of Stomach muscles

Trivia about 3D Printing certification with Fused Deposition Modeling

Did you know that?

    • The technology was created in 1988 by S. Scott and Lisa Crump, the founders of Stratasys. Crump established the know-how to establish his daughter a toy frog using a glue gun and a mixture of polyethylene and candle wax.
    • Fused Deposition Modeling was invented and patented in 1989 by S. Scott and Lisa Crump as a technological know-how for 3D printing certification wherever product is extruded out of a nozzle and makes a 3D object layer by layer.
    • The time period Fused Deposition Modeling and its abbreviation to FDM are trademarked by Stratasys. The just equal time period, fused filament fabrication (FFF), was coined by the customers of the RepRap task to give a phrase that would be legally unconstrained in its use.
    • In 2009, the patent for Fused Deposition Modeling expired and ignited the total marketplace 3D printing certification sector.
    • Materialise has been applying this engineering considering the fact that 2003.

Cannot get adequate of this enjoyable engineering and its components? Then dive into our elaborate substance webpages for a good deal far more info or get your FDM printed component by uploading it to our on the net 3D printing certification support page here.