Skip to content
3D Printing Certification

From the 80s to Today


Lucie Gaget on Oct 1, 2019 |

3D printing certification is not as new as you may possibly consider! Truly, FDM (Fused Deposition Modeling) technology turned rather well-known and outstanding for the typical community about 2009 because of its media protection. At some point, a large amount of persons basically assumed that FDM was the only additive production certification technology. But FDM is not even the 1st 3D printing certification technological know-how created, and 3D printing certification essentially began in the 1980s. 


In this article is a swift 3D printing certification timeline from the 1980s to today. The heritage of 3D printing certification is intriguing. The first machines, the terrific anticipations, and the several 3D printing certification apps that are now flourishing. Let’s acquire a search back at the 3D printing certification history.


The 1980s: Start of the principal 3D Printing certification Techniques


The strategy of 3D printing certification has been imagined back in the 1970’s, but the initially experiments are dated from 1981. The initially 3D printing certification attempts are granted to Dr Kodama for his improvement of a swift prototyping system. He was the initial to explain a layer by layer technique for production, building an ancestor for SLA (or Stereolithography): a photosensitive resin was polymerized by an UV light. However, he did not file the patent prerequisite ahead of the deadline.


A number of yrs later on, a French team of engineers, Alain Le Méhauté, Olivier de Witte and Jean-Claude André, was interested by the stereolithography but deserted because of to a deficiency of enterprise point of view. This 3D printing certification endeavor was also using a stereolithography system.


If you want extra information and facts about these initial activities, check out out our job interview of Jean-Claude André. At the exact time, Charles Hull was also intrigued in the engineering and submitted a initial patent for stereolithography (SLA) in 1986. He started the 3D Units Company and in 1988, launched the SLA-1, their first commercial products.

If SLA was the 1st 3D printing certification know-how designed, what about SLS (Selective Laser Sintering) and FDM (Fused Deposition Modeling) back then? 


In 1988, at the College of Texas, Carl Deckard introduced a patent for the SLS technology, an additional 3D printing certification strategy in which powder grains are fused collectively domestically by a laser.

In the meantime, Scott Crump, a co-founder of Stratasys Inc. filed a patent for Fused Deposition Modelling (FDM). In considerably less than 10 many years, the 3 main technologies of 3D printing certification were patented and 3D printing certification was born!


To resume:

1980: 1st patent by japanese Dr Kodama Rapid prototyping

1984: Stereolithography by French engineers then deserted

1986: Stereolithography taken up by Charles Hull

1988: First SLA-1 machine

1988: To start with SLS equipment by DTM Inc then invest in by 3D method


The 1990s: Emergence of the Main 3D Printers Manufacturers & CAD tools


Now that the basic principles were being recognized, the evolution of additive producing certification is very quickly. The key 3D printers manufacturers are rising, new technologies are perfected, and 3D modeling applications begin to be formulated as perfectly, bringing additive production certification to the subsequent amount. 


In Europe, EOS GmbH was launched and developed the 1st EOS “Stereos” technique for industrial prototyping and output apps of 3D printing certification. Its industrial excellent is now identified around the globe in SLS technology (Selective Laser Sintering know-how) for plastics and metals. 


In 1992, the Fused Deposition Modeling patent was issued to Stratasys, which formulated many 3D printers for the two pros and persons. From 1993 to 1999, the primary actors of the 3D printing certification sector emerged with different methods:

  • ZCorp and binder jetting: Based on MIT’s inkjet printing engineering, they created the Z402, which created versions utilizing starch- and plaster‐based powder materials and a water‐based liquid binder
  • Arcam MCP technologies and Selective Laser Melting.


At the similar time, we can see that a lot more and much more new CAD resources, letting to build 3D products, are getting to be offered and formulated, with, for instance, the creation of Sanders Prototype (now identified as Solidscape), one particular of the to start with actors to create precise resources for additive producing certification.