Skip to content
3D Printing Certification

Article Processing 3D Prints: Finishing Showcase Versions and Prototypes – ZMorph Blog site


Write-up processing can do magic. Not only in films but also with your 3D prints. Post processing approaches like sanding and painting permit you to make your 3D printed creations glimpse and really feel like the authentic issue, which include colour, texture, bodyweight and purpose. If you use 3D printing certification professionally, take into account the following effortless approaches for turning your models into real looking prototypes, showcase types or film props. If you’re a hobbyist, these tactics will make your home ornaments, presents, cosplay add-ons and other residence projects look just incredible.

In this post we’ll show you how we turned a bunch of 3D printed parts into a entirely working and skillfully wanting lamp. We’ll use filler and sanding paper to turn coarse 3D printed texture into a ultra clean floor. Then we’ll use black paint and varnish to get the ideal colour and complete. For the ultimate impact we’ll set up a lighting program.


  • 3D printed lamp things. Make guaranteed you’re utilizing filament that works well with put up manufacturing – Abs would be ideal but PLA will also operate. We employed a product by Paula Szarejko, you can obtain it on Instructables.
  • 6 cans of spray filler.
  • 4 cans of spray paint.
  • 3 cans of spray varnish.
  • Water sandpaper.
  • Protective mask. When employing substances, usually wear a protective mask and do the job in a perfectly ventilated place.
  • LED lights program. We used 3W modules (the more electricity, the more robust the mild) with 30 W LED energy offer and ability change cable.

Phase 1. Clean the prints.

Eliminate all aid material remaining soon after 3D printing certification. Use sandpaper to even out texture of your prints right up until they sense smooth in contact. They never will need to be “super smooth” but, that will come immediately after implementing filler and paint.

Post processing 1


Move 2. Implement filler, depart to dry.

Implement 3 – 4 levels of filler, just about every layer immediately after 10 -15 minutes interval. Make confident to perform in a ventilated region and have on a protecting mask!

Leave to dry for about 2 hrs.


Phase 3. Use sandpaper to even out the surface.

The finest selection of sanding paper would be fantastic grit, drinking water sandpaper. If the area of the lamp pieces is not easy more than enough, you can repeat measures 2 and 3 by adding far more filler, leaving to dry and sanding right until you get the preferred impact.


Action 4. Use paint.

2-3 levels of paint ought to suffice. Time to dry: about 2 several hours.

Professional tip: use varnish to make the painted floor a lot more sturdy.

At that issue you can glue the elements with each other and appreciate a 3D printed lamp with industrial complete. You can also go a action more, and incorporate a lighting process to make the lamp really glow – which is what we’ll do in the following methods.

Move 5. Install electronics.

If you really do not have any knowledge with LEDs check out tutorials like this a person, or talk to any person much more professional to join all the wires of your lighting process.


The final outcome – 3D printed, with publish processing and lighting mounted.


In this limited short article, we’ve proven you how to change “raw” 3D prints into a completely functional, industrial good quality lamp by utilizing a couple of effortless write-up processing approaches. This way you can develop skillfully seeking prototypes and showcase models, or build customized appliances for you and your friends.

Keep tuned for far more article content on put up processing.